bosohn
10-14-2007, 04:23 PM
I have a couple of ADC ADG-630 stack dryers that doesn't heat up.
So, I tried exchanging the entire Gas Train Assembly with the
working dryer, and it still didn't heat up with the Gas Train
Assembly from the working dryer. I made sure that
- The cable to Gas Train Assembly is inserted properly.
- Gas valve for the dryer is open and gas valve right before
the Gas Train Assembly is open.
But, I did not see the spark to ignite.
I'm wondering what else should I check if the ADC dryer doesn't
heat up, even with working Gas Train Assembly.
I didn't try putting Gas Train Assembly from no heat dryer
to working dryer. I plan to try this later just to verify whether Gas
Train Assembly from no heat dryer is working or not.
I would appreciate any help on these no heat dryers as I
have a couple of dryers that doesn't heat up, what else could
be wrong for no heat dryer other than Gas Train Assembly.
Thank You!
So, I tried exchanging the entire Gas Train Assembly with the
working dryer, and it still didn't heat up with the Gas Train
Assembly from the working dryer. I made sure that
- The cable to Gas Train Assembly is inserted properly.
- Gas valve for the dryer is open and gas valve right before
the Gas Train Assembly is open.
But, I did not see the spark to ignite.
I'm wondering what else should I check if the ADC dryer doesn't
heat up, even with working Gas Train Assembly.
I didn't try putting Gas Train Assembly from no heat dryer
to working dryer. I plan to try this later just to verify whether Gas
Train Assembly from no heat dryer is working or not.
I would appreciate any help on these no heat dryers as I
have a couple of dryers that doesn't heat up, what else could
be wrong for no heat dryer other than Gas Train Assembly.
Thank You!