Vend Price Change- No Worky - Wasco JR.

[9mil]

I have some W620 Jr.'s That i tried to change the vend price from 7 to 8 quarters and i simply turned "on" the "8" switch to acheive this price (if that made any sense) - and it counts quarters down and turns on- then promptly acts as though nothing was deposited- No door lock, no water, the "in use" light turns on for a split second then nothing...anyone have any ideas before i call the rep.? I tried adding 1 (by turning "on" the "1" switch - making it 9 quaters...same thing) - I went back to 7 quarters....working like a champ. Just did it to my speed queens and they are perfect! - anything?

[pete f]

I have some W620 Jr.'s That i tried to change the vend price from 7 to 8 quarters and i simply turned "on" the "8" switch to acheive this price (if that made any sense) - and it counts quarters down and turns on- then promptly acts as though nothing was deposited- No door lock, no water, the "in use" light turns on for a split second then nothing...anyone have any ideas before i call the rep.? I tried adding 1 (by turning "on" the "1" switch - making it 9 quaters...same thing) - I went back to 7 quarters....working like a champ. Just did it to my speed queens and they are perfect! - anything?

I do not own any of these machines, but I can tell you the 8 switch does not mean 8 quarters, nor does the 1 switch mean one quarter, though that one could. The dip switches you are flipping represent a number, the number you see next to the switch represent the number of the switch. Find a program manual, it may say for 12 quarters turn on swicth 1 and switch 4. Call wasocamat, or someone eher may have more advice. I know the switches will not be the added number of other switches. That is, #1 might be 1 coin, number 2 might be 2 coins, but number three will NOT be 3 coins, becuase you can flip 1 & 2 to get to 3 coins, #3 switch is probably 4 coins, #4 switch is probably 8 coins.

[9mil]

THanks pete- I was thinking it was 1,2,4,8,16..... with the quarters, but I will call someone to figure it out- my speedqueen machines had no problem at all with it...thanks again! and if anyone has an online manual that would be HUGE!!!

Phil

[9mil]

Just in case someone else runs into this issue-



Wascomat W Series washers
Please click here... ( http://www.coinwash.com/temp/wascomat_W_Series_washers_wc.pdf)






-----------------