Ipso We234 Error F6

[Jose Castro]

Hi, i,m havin a trouble whit ipso we234 error f6, i just found in manual its because the door was unbolt, but didnt say how to repair this problem, imade a lot of checks in switch door etc, the machine have many time with this problem thanks

[MSKLAUNDRY.]

You have a washer with a PS40 control. You will need to check the door switches both top and middle. The bottom not usually the problem. You will also need to check the wiring harness from the swithces to the control and any connector in between. I recently had a HF234 with a similar "F6" problem and it was the harness, even though it looked ok, when you jigled it around it would crap out with a "f6" error. I rewired the door lock and now all is well. You may have to do the same.

When you turn off power and then reapply power does the error code disappear, allowing you to start a new cycle??????