Dexter stack dryer problem

[alesser738]

Got a dryer that won't start, the door switch doesn't activate (the red light on the inside of the computer board) have switched 3 door switches with no luck, computer board, inspected the wires from the door switched to the computer board (everything looks fine)
Basically i'm wondering if anyone has had a wire fail (visually it looked fine with no burns) Not the black one (power) but the blue one? checked all the harness connections and everything is fine. thanks Adam

[Amex]

Did you swap the computer to another dryer to see if the problem follows?

[Joseph Baran]

2 more things to check:

1: Has the strike broken off the door?

and 2: Check the thinner blue, blue/white wires behind the computer board. These sometimes pull out of the plastic connectors.

[pete f]

I am not sure it would make the light go on or off on the CB, but have you tried resetting the limit button in the back? It is in the square metal holder on the side of the burner. Stick a pencil in to push the reset button. If it clicks it was set off, which will keep the dryer from starting.

[alesser738]

Was actually a burnt wire going to the main power from the top dryer. thanks for everyones ideas