geo
06-29-2005, 12:31 PM
Hello All,
I just bought 6 Wasco 30/30 (model ID--30ST) dryer.
There are two dryer that look older and missing sticker model
(I guess seller removed it) older machine has start relay
on coin door and other four has relay mount inside coin door
compartment.
On one of older machine I think I got an intermittent short 27v wiring, Volt meter show 18v then drop down to 10v on B or A switch ( coin mech) . Sometime machine work but a lot of time there is no heat. I replaced transformer and still have problem. I need wiring diagram to trace a short. Is there any component that likely to short on this model?
Is ID—30ST very sensitive to lint build up on lint screen? Few machine got no heat but when I remove lint then heat come back on. Any idea on intermittent heat problem?
Geo
---------------------------------
CLICK HERE to join Coinwash.com Back room
--Service or repair question Only! --
This Fourm is now OPEN !!!
(http://www.coinwash.com/mb/forumdisplay.php?f=15)
This forum is for the Tech Heads and Repair service or repair questions? The fee is $29.99 for 6 months. This is less than .16 cents a day
If there is a question you need answered in the
Forum: ARCHIVE-Service & repair question.
Just cut and paste it in to the NEW FORUM
Coinwash.com Back room Service or repair question
I just bought 6 Wasco 30/30 (model ID--30ST) dryer.
There are two dryer that look older and missing sticker model
(I guess seller removed it) older machine has start relay
on coin door and other four has relay mount inside coin door
compartment.
On one of older machine I think I got an intermittent short 27v wiring, Volt meter show 18v then drop down to 10v on B or A switch ( coin mech) . Sometime machine work but a lot of time there is no heat. I replaced transformer and still have problem. I need wiring diagram to trace a short. Is there any component that likely to short on this model?
Is ID—30ST very sensitive to lint build up on lint screen? Few machine got no heat but when I remove lint then heat come back on. Any idea on intermittent heat problem?
Geo
---------------------------------
CLICK HERE to join Coinwash.com Back room
--Service or repair question Only! --
This Fourm is now OPEN !!!
(http://www.coinwash.com/mb/forumdisplay.php?f=15)
This forum is for the Tech Heads and Repair service or repair questions? The fee is $29.99 for 6 months. This is less than .16 cents a day
If there is a question you need answered in the
Forum: ARCHIVE-Service & repair question.
Just cut and paste it in to the NEW FORUM
Coinwash.com Back room Service or repair question