W184 pressure hose keeps popping out

[CharlieS]

I have a W184. 3 times in the last 6 months the level pressure hose has popped out of the rubber thing at the back bottom of the tub. It has a hard white plastic end that plugs into the rubber drain hose at the back, and this thing pops out. Of course, the entire mat floods (Its unattended).

Fixes? or do you just glue this thing in place.

Charlie

[MSKLAUNDRY.]

Have you tried a hose clamp?

[CharlieS]

It doesn't work that way. There is a rubber hose coming out of the back of the drum. On the top of that hose is a small hole. The level pressure line has a small plastic end that simply pushes into the hole. There is no way to clamp it. I could probably glue it with some RTV. I was just wondering if this was a common problem on the w184 and if there was a common way to address it.

Thanks
Charlie

[MSKLAUNDRY.]

I suppose silicone would do the trick.

[Anonymous]

Did you try the univeral repair - - - Duct Tape?

[David]

Originally posted by CharlieS
... common problem on the w184...

First I've heard of this.

[Coinwash]

Could you take a photo of this problem and email it to us here at Coinwash please.

and a little more information too

We want to see this.

Thanks Coinwash staff

[Jim]

I think you need to go buy a gizmo and stick it into the whatchamacallit, then take a thigamajig and tighten the wizzybom on the whozywig....

Works for me everytime.....

[Anonymous]

Way over-kill, "stick" with the Duct Tape.

[CharlieS]

Hey Jim -

The wozywig was getting coy with the willywog, which is what created this problem in the first place.

I opted for the RTV.

:)

Charlie

[Coinwash]

Now the --W184--- whatchamacallit, and thigamajig and wizzybom on the whozywig....

WORKS now !?!

Great team work Guys

[CharlieS]

Here is the picture of the connection from the wasco manual. Part 53 pops out of 54