PDA

View Full Version : w184 problem


Bob C
08-06-2003, 02:07 PM
Thought I would seek a little imput on a W184 problem before I went down to check it out. Last weekend it didn't spin out when the cylce was over. The customer brought it to my attention and I ran the cycle again and it was fine. I wasn't able to stay and watch the second cycle to look for any problems. It was ok until last night----same complaint, ran it again, and again ok. Looks like a sporadic situation. Any idea's where to start looking?

Thanks in advance

Bob C

MSKLAUNDRY.
08-06-2003, 10:23 PM
Check the drain valve and drain line from tub to floor for debris.

BWJR
08-07-2003, 05:50 PM
BobC,

When you run the machine is it an empty load? If so, you probably have an underwire bra in the drain, which is giving you a slow drain. Clean the drain, by taking it off and clean all sides and top. Also the back drain pipe might be clogged.

Good luck,

BWJR